BRAKE PUMP (3/4" union on high pressure brake pipe) (UE40534HBSXR)

Brake Pump 1972-1980 (3/4" union on high pressure brake pipe) (UE40534HBSXR)

Be the first to review this product

Part Number: UE40534HBSXR

Suitable For: 1972-1980 RR Silver Shadow I, II & Bentley T1, T2

Condition: This is a reconditioned part, sold on an exchange basis so a core unit surcharge will apply

This is a fully reconditioned brake pump with a 3/4" (inch) union on the end of the high-pressure pipe that fits to the top of the brake pump. Our reconditioning process involves initially stripping the pump down so that every component can be deep cleaned and inspected for wear. The body is then Aquablasted, ensuring This is a fully reconditioned brake pump with a 3/4" (inch) union on the end of the high-pressure pipe that fits to the top of the brake pump. Our reconditioning process involves initially stripping the pump down so that every component can be deep cleaned and inspected for wear. The body is then Aquablasted, ensuring that any rust or contamination is removed. Special care is taken to ensure that the castellated section of the main body is serviceable. Very often the teeth are damaged. We refinish any damaged teeth in order to allow continued use of the correct fitting tool (RH8428). The unit is then rebuilt with brand new O rings (UE36747P & UE32170P), main spring (UR70731P), inlet valve (UE9491P), inlet valve spring (UE9672), washer (UE9488), spacer ring (UE9494), seating ring (UE35311P), non-return valve (UE44992P) and circlip (XB14183LP). Once complete the unit is tested for full functionality on our hydraulic test rig which replicates, as closely as possible, the conditions that the pump would experience during normal operation on the vehicle. The finished pump is given a unique FS warranty number, which we log, and can refer to if needed. This pump comes with a full 12-month guarantee. Prior to VIN 12400 (approximately) all cars were fitted with thin bore pipes between the brake pumps and the accumulator spheres. The brake pumps for these models were fitted with a 5/16" union on the high-pressure pipes. From VIN 12400 (approx) a thicker bore pipe was fitted which required larger 3/4" unions on the pipes between the pumps and the valve bodies. The larger bore pipes are recommended as a modification. Earlier models may, therefore, already have been upgraded so please check the union size on your pump prior to ordering. Please contact us if you would like a kit to modify your car to the later thicker bore pipes. Very often problems with brake pumps and low system pressure are caused by wear on the lobe on the camshaft that activates the brake pump push rod. In order to try to rectify this problem without having to replace the camshaft (a very costly job) we have machined some flanges to be 0.030" (inches) thinner than the original (UE9490-0.030SXR). If your camshaft lobe is worn then we recommend fitting this flange and then shimming the flange in order to obtain the correct push rod heights. Following a number of issues with the quality of rubber O rings, we can confirm that our O rings are now manufactured to a known consistent compound formula with full traceability, independently tested to ensure volume increase (swell) and that no negative swell (shrinkage) occurs. Find out more on our Product Information Sheet.

that any rust or contamination is removed. Special care is taken to

$209.00 $209.00

- +

Delivery Information

Tax Information

Model Compatibility

Enquire About This Item

Compare 2 Buying Options

Upsell Products
Product
Title	Brake Pump 1972-1980 (3/4" union on high pressure brake pipe) (UE40534HBSXR)	BRAKE PUMP (UE40534HBSX)
Price	$209.00 $209.00
Condition	Reconditioned	Genuine
Warranty	Three Years	One year as standard; two years if fitted by a franchised dealer
Part Number	UE40534HBSXR	UE40534HBSX
Availability	Contact Us For Lead Time	No Longer Available
Product	Quantity - +	Out of stock

Compatibility & Details

Browse The Full Range

Rolls-Royce Silver Shadow I, Silver Shadow II & Bentley T1, T2 Parts | 1965-1980

Rolls-Royce Silver Shadow I, Silver Shadow II & Bentley T1, T2 Parts | 1965-1980

Brakes

Brake Pumps & Push Rods

Specifications

Part Number (if known)	UE40534HBSXR
Product Condition	Reconditioned
Chassis Range Applicability	1972-1980 RR Silver Shadow I, II & Bentley T1, T2
Warranty Period	Three Years

Tax Information

Please be aware that import duties and taxes may apply in The United States (USA). All duties and taxes are set by USA Customs and Border Protection, over which we have no control. Please note that it will be the responsibility of the customer to pay all duties and taxes.
All parts on our website are shown with their prices exclusive of UK VAT (currently 20%).

Delivery Information

Shipping & Delivery

As an international mail order company, our focus is to get parts to our customers as quickly and economically as possible. Where possible we will try to provide a choice of shipping options.

Our database knows the weight of every part listed on our website. In the majority of cases this allows automatic shipping options for each order to be chosen at the checkout. Unfortunately, penalties will be imposed by all shipping companies if a parcel is particularly large in size compared to its weight, this is commonly known as “voluming out”. This means that sometimes we are unable to accurately quote shipping for orders until we have packed the parcel and confirmed the shipping cost.

Please be aware that import duties and taxes may differ depending on which state the parts are being delivered to. All duties and taxes are set by the Customs Authority of the destination country & state and, as such, we have no control over them. Please note that it will be the responsibility of the customer to pay all duties and taxes.

Our two most commonly used methods of shipment are by the postal service and UPS. We do, however, hold accounts with most major international couriers so please let us know if you have a preferred courier or if you would like us to ship using an account you hold with a specific courier.

Further information (including the ability to track a parcel) is available here:

If you would like to discuss a parcel with a member of our Logistics team please email us using: despatch@flyingspares.co.uk

Below is a guide to the standard postal and UPS shipping terms:

Shipping Guide for the United States

Please be aware that import duties and taxes may apply upon receipt of orders shipped outside of the European Union.

Such duties and taxes are beyond our control as they are set by the Customs Authority of the destination country and state and depend on a number of factors, such as country of origin of the purchased product, local import taxes, and it will be your responsibility to pay them if and when asked to by your local authorities.

Service	Destination	Approx Delivery Time	Type of Package	Trackable	Details
Post - International Standard	United States	5 - 15 days	Up to 2kg	No	Visit the Royal Mail website for more information
Post - International Tracked & Signed	United States	5 - 15 days	Up to 2kg	Yes	Visit the Royal Mail website for more information
Post - International Signed	United States	5 - 15 days	Up to 2kg	Yes	Visit the Royal Mail website for more information
Air Delivery - UPS Express Saver	United States	1 - 5 days	Up to 70kg	Yes	Visit the UPS website for more information

VAT & Custom Duties

All parts on our website are shown with their prices without UK VAT (currently 20%).

All customers from the United States will not have VAT added to their orders.

Flying Spares Ltd cannot advise on, or be responsible for, any Customs or Import Duties or Taxes that are subsequently imposed on your order once it arrives in your country. Please confirm what extra charges your order is likely to incur before confirming the order with us.

Reviews

Write Your Own Review

My Cart

Rolls-Royce

Bentley

Currently Recycling

Discover what models are in the process of being recycled | Learn more